Livestreams are back!

by

Hey everyone, its been a while. Just letting you know that I’m getting back into livestreaming and I would be so happy to see you there. Check out the current schedule and upcoming topics on the Schedule page. Yours Daniel

Transform Your SOVOL SV06: 2023’s Must-Have Printer Upgrades!

by

🛒 Get the SOVOL SV06 here: https://geni.us/sv06 🛒 The bigger SV06 Plus: https://geni.us/sv06plus 3D PRINTED PARTS 🔶 5015 adapter for Sovol SV06 extruder: https://www.printables.com/model/466581-5015-adapter-for-sovol-sv06-extruder 🔶 The Nautilus – Sovol SV06 Fan Duct 5015 Blower Fan V4: https://www.printables.com/model/542760-the-nautilus-sovol-sv06-fan-duct-5015-blower-fan-v 🔶 Nautilus remix for ticker WinSinn 5015 fan: https://www.printables.com/model/638711-fanconnector-remix-for-the-nautilus-sovol-sv06-fan 🔶 Sovol SV06 Strain Relief: https://www.printables.com/model/452682-sovol-sv06-strain-relief 🔶 Sovol SV06 … Read more

Scan to Print: Creality Scan Ferret & QIDI X-Plus 3

by

In this video, I’m unboxing and testing the new QIDI X-Plus 3 and the Creality Scan Ferret for the first time. I’m doing an end to end 3D scanning to 3D printing process. QIDI X-Plus 3: https://geni.us/qidixplus3 Creality Scan Ferret: https://geni.us/crscanferret THE PRINTERS I USE: https://kit.co/danielcrosslink/the-3d-printers-i-useMY MERCH: https://www2.crosslink.io/shop BECOME A PATRON: https://www.patreon.com/crosslinkCHAT ON DISCORD: https://discord.gg/ne3J4Rf BUSINESS INQUIRIES ONLY (OR … Read more

Revopoint POP 3 Scanning results

by

It’s been a while since we tested a new product and this time it’s the Revopoint POP3. In this video, I’ve done an in-depth review of the brand new scanner from Revopoint and gave it 5 challenging objects to scan. This is the first time, we’re using the new object set to test scanners and … Read more

Heat press inserts workstation

by

These are all the parts, I have used to build my heat press inserts workstation: Dremel 220 Workstation: https://geni.us/dremel220 80W Soldering iron kit: https://geni.us/80wsolder Ruthex threaded insert tips: https://geni.us/ruthextips 3D printable adapter for Dremel 220: https://www.printables.com/model/405918-heat-set-insert-press-hakko-fx888-dremel-workstati THE PRINTERS I USE: https://kit.co/danielcrosslink/the-3d-printers-i-use MY MERCH: https://www2.crosslink.io/shop BECOME A PATRON: https://www.patreon.com/crosslink CHAT ON DISCORD: https://discord.gg/ne3J4Rf BUSINESS INQUIRIES ONLY … Read more

Why 3D printing is changing manufacturing forever

by

As someone who is deeply passionate about innovation and technology, it’s hard not to get excited about the potential of 3D printing. Also known as additive manufacturing, 3D printing is a process that allows for the creation of three-dimensional objects by building them layer by layer using a variety of materials such as plastic, metal, … Read more

All the upgrades on my Ender 3 v2

by

I got the Ender 3 v2 probably about a year ago and since then, I upgraded it multiple times to make this printer as reliable as possible and to get the best print quality. So let’s go through the most important upgrades and mods I did on this Ender 3 v2. As usual when we … Read more

Ultra fast probing and homing with Marlin firmware – 3×3 mesh in 29 seconds, 8×8 mesh in under 2 minutes!

by

I’ve talked about installing bed leveling probes in quite a few videos but we never talked about that his whole auto bed leveling process is pretty slow by default. In this video, we’ll bring the time for bed leveling a 3×3 mesh from 73 seconds down to astonishing 29 seconds and an 8×8 mesh will … Read more