Transform Your SOVOL SV06: 2023’s Must-Have Printer Upgrades!

🛒 Get the SOVOL SV06 here: https://geni.us/sv06 🛒 The bigger SV06 Plus: https://geni.us/sv06plus 3D PRINTED PARTS 🔶 5015 adapter for Sovol SV06 extruder: https://www.printables.com/model/466581-5015-adapter-for-sovol-sv06-extruder 🔶 The Nautilus – Sovol SV06 Fan Duct 5015 Blower Fan V4: https://www.printables.com/model/542760-the-nautilus-sovol-sv06-fan-duct-5015-blower-fan-v 🔶 Nautilus remix for ticker WinSinn 5015 fan: https://www.printables.com/model/638711-fanconnector-remix-for-the-nautilus-sovol-sv06-fan 🔶 Sovol SV06 Strain Relief: https://www.printables.com/model/452682-sovol-sv06-strain-relief 🔶 Sovol SV06 … Read more

Scan to Print: Creality Scan Ferret & QIDI X-Plus 3

In this video, I’m unboxing and testing the new QIDI X-Plus 3 and the Creality Scan Ferret for the first time. I’m doing an end to end 3D scanning to 3D printing process. QIDI X-Plus 3: https://geni.us/qidixplus3 Creality Scan Ferret: https://geni.us/crscanferret THE PRINTERS I USE: https://kit.co/danielcrosslink/the-3d-printers-i-useMY MERCH: https://www2.crosslink.io/shop BECOME A PATRON: https://www.patreon.com/crosslinkCHAT ON DISCORD: https://discord.gg/ne3J4Rf BUSINESS INQUIRIES ONLY (OR … Read more

Revopoint POP 3 Scanning results

It’s been a while since we tested a new product and this time it’s the Revopoint POP3. In this video, I’ve done an in-depth review of the brand new scanner from Revopoint and gave it 5 challenging objects to scan. This is the first time, we’re using the new object set to test scanners and … Read more

All the upgrades on my Ender 3 v2

I got the Ender 3 v2 probably about a year ago and since then, I upgraded it multiple times to make this printer as reliable as possible and to get the best print quality. So let’s go through the most important upgrades and mods I did on this Ender 3 v2. As usual when we … Read more

Ultra fast probing and homing with Marlin firmware – 3×3 mesh in 29 seconds, 8×8 mesh in under 2 minutes!

I’ve talked about installing bed leveling probes in quite a few videos but we never talked about that his whole auto bed leveling process is pretty slow by default. In this video, we’ll bring the time for bed leveling a 3×3 mesh from 73 seconds down to astonishing 29 seconds and an 8×8 mesh will … Read more

3D printing for beginners feat. Prusa Mini Plus

So you wanna get started with 3D printing or you’re still undecided if you should. In this post, I’m going to talk about what you need to know, to get started, what questions you need to ask yourself – featuring the Prusa Mini Plus. So – getting started with 3D printing – you should ask … Read more