Q&A while building the Ender 3 Pro with SKR 1.2 and TFT35 Upgrade
In this video, I am building the Ender 3 Pro and answering your questions from the Q&A polls.
Ender 3
AWESOME 3D Prints EP01 – Ender 3 Timelapses / Octolapses
Printed on the Ender 3: https://geni.us/ender3
Suggest a design for a timelapse: https://www2.crosslink.io/suggestaprint
All my videos about the Ender 3: https://www.youtube.com/playlist?list=PLV3fxzgNDX7z7UqPJGyKXP1GrYJ8fJFqC
Shrinking Marlin 2.0 – How to reduce firmware size for 8 bit boards and still use a BLTouch and the filament sensor!
In this guide, I talk about how I got Marlin firmware 2.0 shrinked down to fit on the original Ender 3 mainboard while still supporting a BLTouch and a filament sensor at the same time.
Ender 3 Upgrades – BLTouch sensor with Marlin 2.0
In this guide, I am installing a BLTouch sensor on this Ender 3 using the stock Creality mainboard and Marlin 2.0 firmware.
Ender 3 (Ender 5, CR10) Upgrades – Filament runout sensor with Marlin 2.0
In this video, I show you how to install a filament runout sensor on your Ender 3, Ender 5 and other Creality printers.
TWO free GPIO pins! – Creality Mainboard PIN27 and PIN29 breakout explained
In this guide, we’ll have a look how to get TWO – yes TWO – free IO pins on Creality’s standard 8 bit mainboards to connect things like a LBTouch and filament sensors at the same time.
Ender 3 (Pro) Marlin 2 0 Installation Upgrade – Updated Version
In this guide, I show you how to install Marlin 2.0 firmware on the Ender 3 or the Ender 3 Pro.
Ender 3 finally SILENT? Upgrades, More Fan Shrouds and Silent Fans
In this video, I am testing a few more Fan Shroud Upgrades for the Ender 3 and how better Fans can reduce the noise level of this printer even further.
Ender 3 Noise Reduction – Silent Mainboard 1.1.5 by Creality + GIVEAWAY!
[youtube https://www.youtube.com/watch?v=pHYglQSagFk&w=480&h=270] In this video, I will show you how make your Ender 3 print silent (less noisy) with the new Creality Mainboard 1.1.5. Read the blog-post below for a text version. Hello, my name is Daniel, welcome to the CrossLink blog. I would like to help you being more successful with 3d printing and … Read more